CarPlay Radio Screen for Mitsubishi: compatibility and installation guide model by model

Mitsubishi has a very specific reputation: cars that do not give trouble. An Outlander or a Pajero with plenty of miles on them still do the job, and the ASX became one of the most common compact SUVs on the road. The problem, once again, is the screen: while the mechanics kept going, the infotainment stayed stuck on the CD and on DVD navigation units that are useless today.

There is also a detail that confuses a lot of people: several Mitsubishis share their platform with Peugeot and Citroën, so the right screen does not always carry the Japanese brand name in its title. This guide sorts that out: model by model, what each Mitsubishi has from the factory and which Android screen with wireless CarPlay and Android Auto matches it.

Which Mitsubishis come with CarPlay from the factory?

Only the most recent ones, and not all of them. On the used market you usually find this:

• CD radio with a small display: the one in the early Lancer, ASX and Outlander. Radio, CD and Bluetooth hands-free only on higher trims.
• MMCS (Mitsubishi Multi Communication System): the brand's own navigation, with maps on DVD or hard drive. When it launched it was the top-of-the-range unit; today its maps are out of date and updating them is not worth it.
• Rockford Fosgate: on the Outlander and Pajero with the premium sound system, the amplifier is separate. It matters to know this before buying, because it determines the harness.
• Smartphone Link Display Audio (SDA): the latest system, already with CarPlay and Android Auto, but wired and only at the end of each model's production run.

If your Mitsubishi falls into any of the first three groups, no software update will add CarPlay. The real route is replacing the unit with a model-specific screen.

The solution: a model-specific Android screen for Mitsubishi

Each screen is built for the aperture, the trim frame and the connectors of one specific model, so the dashboard keeps its factory look. What you gain:

• Wireless Apple CarPlay and Android Auto: the phone connects on its own when you start the car, with no cables.
• HD touchscreen far larger than the original display or the MMCS.
• Google Maps and Waze with real-time traffic, instead of the DVD navigation.
• Android with the Play Store: Spotify, YouTube, podcasts and all the usual apps.
• Steering wheel controls and sensors preserved through the model-specific CAN-BUS module.
• Hands-free with an external microphone, Bluetooth, WiFi, GPS, camera input and amplifier outputs —important on cars with Rockford Fosgate—.

Mitsubishi compatibility: model by model

These are the families with a model-specific screen, with the product page and the guide for each one:

• Mitsubishi Lancer: see screen and installation guide. It fits both the saloon and the Sportback of the last European generation.
• Mitsubishi ASX, along with its twins the Citroën C4 Aircross and the Peugeot 4008: see screen and installation guide.
• Mitsubishi Outlander XL 2 (2005-2011), shared with the Peugeot 4007 and the Citroën C-Crosser: see screen for cars with Rockford Fosgate, version without Rockford and installation guide.
• Mitsubishi Outlander 3 (2012-2021): see screen and installation guide. Includes the PHEV versions with the same dashboard.
• Mitsubishi Pajero 4 (2006-2014): see screen and installation guide.

Before choosing for the Outlander XL 2 it is worth checking one thing: if your car has the Rockford Fosgate system, you need the reference prepared for that amplifier. It is easy to spot from the logo on the speakers and on the boot subwoofer.

Can't see your model, or not sure which radio you have? Send us a photo of your console on WhatsApp and we'll tell you for free which one is yours.

What is the installation like on a Mitsubishi?

It is a plug & play fit onto the car's own connectors:

1. Disconnect the negative battery terminal before removing anything.
2. Release the console trim with a plastic tool, following the clips. On the Outlander and ASX the frame runs down to the climate control area: free it completely before pulling.
3. Pull out the original unit, undoing the screws, and disconnect power, speakers, antenna and USB.
4. Plug in the model-specific harness to those same connectors, without cutting or splicing any original wiring.
5. Connect the CAN-BUS module, which keeps the steering wheel controls, the parking sensors and the warnings on the new screen.
6. If you have Rockford Fosgate, connect the outputs to the amplifier as per the manual so you do not lose the premium sound.
7. Fit the microphone next to the rear-view mirror and, if you are adding a camera, run the cable to the tailgate along the roof edge.
8. Test everything before closing up: audio, wireless CarPlay, GPS, camera and controls.

Between 30 and 60 minutes depending on the model. It comes with a manual and WhatsApp support while you do it.

How much does it cost to add CarPlay to a Mitsubishi?

At the official service, for a Lancer, an ASX or an Outlander of these generations the answer is usually that the system does not support CarPlay: it cannot be updated, it has to be replaced. And replacing it means a unit, a frame, a harness, a steering wheel control interface and labour, with wired projection at best.

The model-specific screen arrives with everything in the same kit —frame, harness, CAN-BUS, microphone and GPS— and with wireless CarPlay and Android Auto included. Each product page shows the current price and the available memory versions.

Frequently asked questions

I have the MMCS navigation. Is it worth replacing?
Yes. Its maps depend on a medium that is no longer updated at a reasonable price. With the new screen you navigate with Google Maps or Waze and real-time traffic.

My Outlander has Rockford Fosgate. Do I lose the premium sound?
No, as long as you choose the reference prepared for that system: it keeps the original amplifier and subwoofer.

Do I lose the steering wheel controls or the parking sensors?
No. The model-specific CAN-BUS module preserves them, with their warnings on the new screen.

My car is a Peugeot 4007 or a Citroën C-Crosser. Does the same screen fit?
Yes. They are the same car with a different badge, and they share the dashboard and connectors with the Outlander XL 2.

Can I add a reversing camera?
Yes, every screen comes with a video input ready. On the Pajero and Outlander, with that high tailgate, it is one of the most appreciated upgrades.

Will it pass the roadworthiness test?
Yes. It goes in the original aperture and does not alter any safety component, so no type approval is required.

See CarPlay screens for Mitsubishi

➡️ See all CarPlay and Android Auto screens for Mitsubishi · if your car is an Outlander, start with the Outlander 3 guide.